2 3/8" X 3.345 OD Small. 5.0" X 3.345" OD Large. Singles need washer between them
|
Comes complete with all hardware.
Aluminum finish
Balls powder coated purple
20" and 24" shifter linkage
|
New ajustable J-bar. No need to remove from car to adjust. Has 6" drop.
|
New adjustable J-bar. No need to remove from car to adjust. Has 6" drop.
|
Used for adjustable upper control arm
Made from steel
|
One bearing design
Fits metric caliper
Bearing sizes .001,.004,.008
|
Bearing gas pedal allows for smooth movement. Adjustable on both ends for greater comfort. Needle bearings are sealed in center tube.
|
Allows you to adjust J-Bar up and down without removing it.
1/2" thick steel plate 3/4" thick at gear.
Adjuster climbs up and down with one wrench.
|
Fits a 5.0" spring
Fits Bilstein, QA1 & others
Lynch pin in bottom for easy spring change
Angel cut top for fast, no tool spring change (not picture)
Threaded tube has scale on flat spots
|
|
|
2" Drop Shock, fits steel birdcages.
|
|
For mounting panhard bar
Arc allows movement of panhard bar without adjustment to the bar
19.5" arc on short side
Over lapping hole
Made for a 2" x 2" tube
1" thick aluminum
Comes with bushing and bolts
|
Light weight steel
Large bend radius produces stronger part
Fits small block chevys
Sold in sets
|
|
|
|
|
|
Reinforced on right side to 3/4 thick
Has center of pinion hole
1/2" thick steel
Has lower hole
|
2 way bearing pull bar
Fully machined pull bar
Red poly bushing on brake
Bearing construction
Alloy shaft
|
Double row ball bearing. Dirt seals.
|
|
|
Designed for Skyrocket Chassis and ran in the 2006 season by Kelly Shryock. Double shear brackets. Locates on inner race to reduce side load. 6" shock drop. Uses #7100 bearing cage on the left side. Comes with 3. 008" size bearing.
|
|
Uses two bearing
2.0" wide
Used as 4- link, swing arm, z-link or 2- link birdcage.
Run with 7321or 7325 clamp bracket
|
|
|
|
|
Three O-Ring Design to eliminate leakage.
Allows length to be adjusted to match Fuel Bowls.
Aluminum Fuel Bowl Gaskets included.
|
Universal collar screw in ball joint
Used for adjustable upper control arm
Made from steel
|